Official importer for the Netherlands and Belgium

NORIT dry floor systems, supplied by JUPITER Benelux

Gypsum fibre dry screeds and dry-build underfloor heating from Lindner: glued and clicked together, without screws. We advise on the floor build-up and deliver through the JUPITER Shop.

Request advice or a quote View the floor range

Fire class A1
Wet rooms up to W1-I
No screws or staples

Finished interior with a wooden floor on a NORIT dry floor — Lindner reference project

NORIT-TE 20

20 mm · click joint · A1

The NORIT floor range

Three product families for a dry floor

From levelling to screed and underfloor heating: all NORIT floor products are made by Lindner. JUPITER Benelux supplies them and advises on the right combination.

Dry screed

Gypsum fibre screed boards that you glue and click or push together. A load-distributing layer under all common floor finishes.

NORIT-TE 30 Therm GF element with grooves for the heating pipe

Dry-build underfloor heating

Gypsum fibre elements with grooves for the heating pipe, for heating and cooling in a dry build-up.

NORIT screed board on a dry fill of expanded clay

Levelling and fill

To fill height differences in the subfloor so that the screed lies flat.

Accessories · NORIT-TE adhesive · edge insulation · tapping blockAll NORIT products in the JUPITER Shop →

NORIT-TE 20 at a glance

Click joint

Glued in the groove, without screws or staples

Wet rooms up to W1-I

Such as a bathroom floor in a home; not under a walk-in shower

Fire class A1

Non-combustible according to EN 13501-1

Approx. 26 kg/m²

At a board thickness of 20 mm

Build-up

How a NORIT floor is built up

Without underfloor heating With JUPITER IDEAL With NORIT Therm GF

Floor finishof your choice

NORIT screedTE 15, 20 or 25 · 15–25 mm, glued

JUPITER IDEALdry-build underfloor heating

NORIT-TE Therm GFTE 20, 25 or 30 · screed and underfloor heating in one

NORIT dry fillif needed

Subfloorconcrete or existing floor

Left: edge insulation along all walls, made of PE foam, stone wool or an alternative, depending on the requirements. The JUPITER IDEAL underfloor heating lies under the NORIT screed, which acts as the load-distributing layer.

1
Prepare the subfloor
Dry, clean, free of grease and level. Fill height differences with dry fill.
2
Fit edge insulation
Along all walls and adjoining building elements. PE foam, stone wool or an alternative, depending on the requirements.
3
Glue and join
Adhesive in the groove, then click or push the boards together, depending on the type.
4
Finish
Apply the floor finish according to the installation guidelines and in line with the wishes and requirements of the floor finish supplier.

Full installation steps: NORIT-TE 20 →